Steps On How To Do A Chimney Cleaning

By Christine Scott


A chimney is a type of a structure which will provide ventilation from smoke or flue gases which are coming from fireplaces, furnaces, stoves, or boilers into an atmosphere outside the house. Typically, these structures are vertical in position in order to ensure that the gases will be flowing upwards in a smooth manner. The flue is a space located inside the chimneys. A chimney is often used in most ships, buildings, and steam locomotives.

At times, burning fires from the chimneys cannot be avoided and these often cause fires due to having some sticky and flammable substances such as creosote and soot. Chimney cleaning Windsor Locks CT can be done by hiring professionals that can sweep it, but doing it may be expensive. So with this article, you will be provided with the simple steps on doing the cleaning by yourself safely.

The following steps are to be done in 4 methods. First preparing to clean the chimneys. Before you start, you must have to determine if the chimney will be needing the cleaning process. It would be important that the chimney is cleaned once a year. If these are used more frequently, to clean it often is needed. Also try to check some animals living in it sine at times, you may not check it for a while.

Next is measuring the flue. When doing all the cleaning methods, make sure that you are using the proper tools with proper sizes. Make sure to measure all sides starting from the bottom or the fireplace, them climbing up using a ladder for measuring the top part. Purchase all the needed supplies by going to the nearby hardware stores.

Dressing appropriately is also needed to avoid your new clothes in getting the dirt out from the soot. Old clothes are recommended to be worn. In order to cover your hair, you may use a bandanna, to protect your hands, use gloves, and to protect your eyes, use goggles. Your floor should be covered also with either a plastic tarp or a drop cloth to avoid dirt.

Second is to start cleaning the top then down to the bottom part. You need first to set up the ladder to be used in climbing the roof. You may also set up your ladder outside the house and lean it into house, but be sure that it is safe. So start by assembling the pipe section and brush to scrub the flue. The pipe may be added with many sections as the extensions for the brush.

Third is cleaning from bottom to the top. The same steps will apply when using pipe sections and a brush for flue scrubbing. Then after those steps, clean from bottom then to the top by the use of a pulley system together with brush. Place the pulley on top of the roof.

You may want someone to help you in this step by holding one rope and dropping the other side, the rope is attached with a brush at the center. Work together with your partner by using the ropes in pulling up and down the brush. This will work by scrubbing the chimney flue.

Then lastly is to clean the entrance of flue by the use spade and shovel. Then after, reattach the removed damper handle. The plastic tarp or the drop cloth may have some debris, so it can be cleaned by a broom and a dustpan.




About the Author:



Aucun commentaire:

Enregistrer un commentaire